HI-MELT RB 2
Premium Rubber Parts Grease
Hi-Melt RB 2 is a premium quality clay thickened grease formulated with Castor Oil, a biodegradable vegetable oil, to provide outstanding performance in a wide range of automotive and industrial applications where contact with natural and/or synthetic rubber components is required or likely. Unlike mineral oil based greases, the Castor Oil component of Hi-Melt RB 2 means that it will not adversely affect rubber parts therefore preventing excessive softening or hardening.
By its very nature Castor Oil imparts excellent lubricity and corrosion prevention properties to Hi-Melt RB2. A food grade antioxidant has been included to maximise in-service and storage life.
The state-of-the-art equipment and procedures employed to manufacture Hi-Melt RB 2 imparts to this grease a high degree of mechanical and storage stability. It will not breakdown under high mechanical stress. In storage it will not alter consistency or release oil.
Hi-Melt RB 2 is an NLGI 2 consistency greases.
Hi-Melt RB 2 is recommended as a general purpose, non-harmful grease for automotive, industrial and consumer parts or components consisting of natural or synthetic rubber. These include hydraulic dust covers, braking system components, seals, washers, stoppers, tyre rims for ease of fitting etc.
The recommended operating temperature range for Hi-Melt RB 2 is from -9 oC to 80 oC.
Compatible with natural & synthetic rubbers
Protects against rust and corrosion
Easy to apply
Ingredients are non-harmful to environment
Outstanding storage stability
Health, Safety & Environmental
This product is classified as non-hazardous. No special precautions are required if employed and handled in accordance to normal practice for this type of product. Good personal hygiene is recommended when handling this product. After any spills or personal contact, the skin area should be washed with soap and water. Clothing should be laundered. Additional health, safety and environmental information is available in the Material Safety Data Sheet which can be obtained by contacting VELOIL CORPORATION.
HI-MELT RB 2
NLGI Grade 2
Product Code 9050802
Thickener type Clay
Worked Penetration 280
Drop Point, oC >288
Flash Point oC 230
Viscosity @ 40 oC, cSt 315
Due to continual product research and development, the information contained herein is subject to formulation changes without notice.